Nikoismusic.com Other Is the Cisco ICS 7750 compatible with hwics?

Is the Cisco ICS 7750 compatible with hwics?

Is the Cisco ICS 7750 compatible with hwics?

Routers do not support HWICs. To install interface cards in the Cisco ICS 7750, use a MRP 7 or ASI 81 8 card. Tip See the “Processor Cards Feature Summary” chapter in Cisco ICS 7750 System Description for more information about these cards. Routers do not support HWICs.

What are the specifications of a Cisco HWIC?

The specifications of the HWICs are listed in Tables 4, 5, and 6. Table 5. HWIC Signaling and Telecom Specifications Table 6. Specifications unique to Cisco 1-Port T1/Fractional T1 DSU/CSU WAN Interface Card (HWIC-1DSU-T1) Table 7.

What kind of serial cable does hwic-1t use?

The HWIC-1T, HWIC-2T, and HWIC-2A/S use Cisco Smart Serial connectors. The supported cables are noted in Table 3. The HWIC-1DSU-T1 uses a RJ-45 connector. Table 4.

What’s the difference between WIC and HWIC-Cisco community?

The HWIC-4T can support up to 8Mbps on each port at the same time (for a total of 32 Mbps) on all supported platforms (it’s not supported on the 1800 series routers). * Supports one port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots.

Can a double wide interface card be installed on a Cisco router?

Double-wide interface cards can only be installed in interface card slots on Cisco 1900 series, Cisco 2800 series, Cisco 2900 series, Cisco 3800 series, and Cisco 3900 series routers. Figure 2 shows a sample double-wide interface card. The Cisco interface cards described in this document are supported on the following Cisco routers:

What are the Cisco High Speed WAN interface cards?

Enhanced High-speed WAN interface cards (EHWIC) provide expanded LAN and WAN capabilities, such as Gigabit Ethernet and Ethernet switching. Note EHWICs are supported on Cisco 1861-E, Cisco 1900 series (modular), Cisco 2900 series, and Cisco 3900 series routers.

Where are the interface cards in Cisco 2901 router?

Note To install double-wide interface cards in Cisco 2901 routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3.