Where do I find the ICOM programming software?

1. Display Radios: Press and hold the Up Arrow and P3. Switch the power on. The display will show the firmware version. 3. Non-display radios: You will need the software. Connect the radio to your computer using the cloning cable, open the software and click Clone > Information. See note above regarding programming cables.

Is the ICOM ic-f3001 RSS v1.1 compatible?

Icom IC-F3001 RSS v1.1… Points are Non-Refundable! Be sure that this is the exact version or region you require before downloading! Users have reported that this download is compatible with the indicated Operating Systems but an X does not necessarily mean it isn’t.

What kind of cable to use for ICOM radio?

Icom Cloning Cables – Please Read Icom Radio Icom Software Icom Cable (s) F1000 / F2000 CS-F2000 OPC-478UC (USB) F1000D / F2000D CS-F2000D OPC-478UC (USB) F1100D / F2100D CS-F2100D OPC-478UC (USB)

How do I connect my ICOM radio to my computer?

Connect the radio to your computer using the cloning cable, open the software and click Clone > Information. See note above regarding programming cables. Press and hold P1 and OK, then switch the power on.

How to check firmware on ICOM f9511 F9521?

Press and hold P1 and OK, then switch the power on. Next, press P1 to select Firm Info on the Display. To check your firmware on the F9511, F9521: Press and hold P0 and P3, then switch the power on. See note above regarding programming cables.

Can you use ICOM cloning software on a PC?

Icom programming software allows users to set frequencies and functions within their Icom radios. Also know as Icom Cloning Software, this software runs on your PC under the Windows Operating System. You may download your software immediately after ordering. You can find installation instructions here.